ALP-600
ANTENNA BRACKET KIT
Order No. 878898
TELEX COMMUNICATIONS, INC.
PN 801546
8601 East Cornhusker Highway, Lincoln, NE 68505
INSTRUCTION MANUAL
General Description
Components
The ALP-600 Antenna Bracket Kit is a
configuration of aluminum brackets with
mounting hardware used to securely hold the
ALP-600 Telescoping Antenna Mast.
.
Universal Stadium Antenna Mounting Plate
.
.
.
.
.
Antenna Mast Bracket Assembly
Antenna Bracket Hardware Kit
The Universal Stadium Mounting Plate, (Figure 1)
can be mounted vertically or horizontally
depending upon the object in which it is mounted
to. The Antenna Mast Bracket Assembly, (Figure
2) then easily attaches to the previously mounted
plate by turning the hand knobs until tight.
2 - U-bolts
4 - Hex Nuts
4 - Flat and Lock washers 2 - Lag Screws
4 - Wing Nuts
Figure 1
Figure 2
Universal Stadium Mounting Plate
Antenna Mast Bracket Assembly
-1-
Universal Stadium Mounting Plate and
Antenna Mast Bracket Assembly
MOUNTING
HOLES
CENTER LINE
CENTER LINE
MOUNTING
HOLES
Horizontal
Mounting
Vertical
Mounting
Hole alignment will be off center to right side.
Hole alignment will be off center to left side.
MOUNTING
HOLES
MOUNTING
HOLES
U-clamps or lag screws may be used
for permanent mounting
Figure 6
Mounting Holes
-3-
Horizontal
Vertical
Table
Figure 7
Mounting Suggestions
PRINTED IN U.S.A..
Copyright© 1997 by Telex
TELEX COMMUNICATIONS, INC.
All rights reserved
July 1997
-4-
|